Splash N Shine logo

Leaf Filter Installation in Mission

Mission's hillside homes above the Fraser and rural acreages to the north catch plenty of rain, moss and tree debris across large roofs and long gutters.

Mission's north-of-the-river rainfall and tall timber mean roofs moss heavily and gutters fill with needles, especially on hillside lots backing onto forest.

  • Licensed & Insured
  • 100% Satisfaction Guarantee
  • Free Quotes, No Obligation
  • 24-Hour Quote Response
Cut-through diagram of a micro-mesh gutter guard fitted to an existing gutter: rain passes through the stainless mesh into the trough while leaves and needles dry on top and shed off the outer edge, Leaf Filter Installation in Mission, BC

Trusted leaf filter installation for Mission homes

Leaf filter installation costs $20 per foot of gutter, installed, before GST. We measure your gutter runs for free and give you the total before any work starts.

Every install starts with a full gutter clean and downspout flush, so the system starts clear. Then stainless micro-mesh guards are fitted to your existing gutters. Rain goes through; leaves, cedar needles and roof grit stay on top, dry out and blow off.

We serve homeowners right across Mission (Hatzic, Cedar Valley, West Heights, Silverdale, Mission Downtown and everywhere in between) with the same fully-insured, eco-friendly leaf filter installation we bring to the rest of the Lower Mainland.

Leaf Filter Installation in Mission: what to expect

Mission presents its own particular challenges for leaf filter installation. Mission's north-of-the-river rainfall and tall timber mean roofs moss heavily and gutters fill with needles, especially on hillside lots backing onto forest. Because of that, every Mission leaf filter installation visit begins with a proper look at your property: which way the roof faces, how much shade and tree cover it gets, the age and material of the surfaces, and how quickly moss, algae or grime tends to return in your part of town. Only then do we choose the gentlest method that does the job, so nothing gets damaged and the results last.

Whether your home is in Hatzic, Cedar Valley, West Heights or anywhere else in Mission, you get the same fully insured, background-checked crew and the same eco-friendly, biodegradable treatments we use right across the Lower Mainland. We also look after homeowners in neighbouring Abbotsford, Maple Ridge and Chilliwack, so if you own more than one property in the area we can keep them all on the same schedule. Every Mission leaf filter installation job is backed by our 100% satisfaction guarantee, and your quote is always free, fixed and returned within 24 hours, with no obligation.

Why Mission homeowners choose us for leaf filter installation

End routine cleanings

Micro-mesh keeps out leaves, cedar needles and moss debris, the three main gutter cloggers in our region.

Handles BC rain

Fine mesh lets heavy rain through while the debris stays on top.

Fits existing gutters

Installed on your current gutters. No gutter replacement needed.

Cleaned before install

Every installation includes a full gutter clean and downspout flush first.

Our leaf filter installation process in Mission

  1. 1

    Measure & assess

    We measure the gutter runs and check pitch, fastening and the roof edge. At $20 per foot, you get the total up front.

  2. 2

    Full gutter clean

    Gutters and downspouts are cleaned and flushed so the system starts clear.

  3. 3

    Precision installation

    Guards are cut and fastened to your gutter profile for a secure, low-profile fit.

  4. 4

    Water test

    We test the flow across the system and walk you through the finished work.

Leaf Filter Installation in Mission: FAQs

Do you offer leaf filter installation throughout Mission?

Yes. We cover all of Mission, including Hatzic, Cedar Valley, West Heights, Silverdale and surrounding areas. Mission's north-of-the-river rainfall and tall timber mean roofs moss heavily and gutters fill with needles, especially on hillside lots backing onto forest.

How much does leaf filter installation cost?

$20 per foot of gutter, installed, before GST. We measure your gutter runs for free, so you know the total before we start. Every install begins with a full gutter clean and downspout flush.

Which gutter guard is best: micro-mesh, foam or surface-tension?

For Lower Mainland homes under cedars and firs, micro-mesh. Needles fall through perforated covers, foam inserts trap fine debris and can grow moss, and surface-tension guards can let heavy rain overshoot. Micro-mesh openings are smaller than a needle is wide.

How do you clean gutters that have guards on them?

Usually you only brush the top of the mesh every 1 to 2 years, because debris dries and blows off. If an older guard has let debris in underneath, it has to come off so the gutter can be cleaned, then go back on.

Do leaf filters really work with cedar needles?

Fine micro-mesh does. Needle-shedding cedars and firs are exactly why we install fine mesh rather than cheap perforated covers.

Can filters be installed on old gutters?

Usually yes, if the gutters are sound. We check first and tell you if a section needs repair before it is worth covering.

Do gutter guards affect my roof warranty?

No. Our guards fasten to the gutter, not under your shingles, so roofing warranties are not affected.

Our 100% satisfaction guarantee

If you're not completely happy with your Mission leaf filter installation, we'll come back and make it right at no extra cost.

Get a free leaf filter installation quote in Mission

Takes 60 seconds. We'll reply within 24 hours with a no-obligation quote for your Mission home.

  • Licensed & Insured
  • 100% Satisfaction Guarantee
  • Free Quotes, No Obligation
  • 24-Hour Quote Response

Three quick details, that's all. We reply to every request within 24 hours.

Ready to restore your home's exterior?

Free quotes within 24 hours. Fully insured, eco-friendly, and backed by our 100% satisfaction guarantee across the Lower Mainland.

Call +1 (778) 804-5911